Demontage und Montage, Motor komplett Disassembly and re-assembly of complete engine Dйmontage et remontage, moteur complet Desarmado y ensamblado, motor completo English Franзais Espacol 6. Insert bearing shells. 6. Mettre en place les coussinets. 6. Colocar los semicojinetes. 7. Insert bearing shell in main bearing cap. 7. Mettre en place les coussinets dans le chapeau de palier principal. 7. Colocar los semicojinetes en las tapas de los cojinetes de apoyo. 8. Place half thrust rings on thrust bearing cap. Gauge and note down width. Dimension “b”. 8. Appliquer les demi-cales latйrales sur le chapeau de palier d’ajustage, mesurer la largeur et la noter. Cote »b ». 8.
Poner las medias arandelas de tope contra la cara lateral de la tapa del cojinete de empuje. Medir el ancho y apuntarlo. Medida “b”. 4 9. Determine end float. 9. Dйterminer le jeu axial. 9. Determinar el juego axial. Example: Dimension a = 32.23 mm Dimension b = 32.37 mm Dimension a – dimension b = end float = 0.14 mm Exemple: Cote a = 32,23 mm Cote b = 32,37 mm Cote a – cote b = jeu axial = 0,14 mm Ejemplo: medida a = 32,23 mm medida b = 32,37 mm medida a – medida b = juego axial = 0,14 mm Allowable end float: 0.10 – 0.28 mm Jeu axial admissible: 0,10 – 0,28 mm Juego axial admisible: 0,10 – 0,28 mm 4.00.17 © 2002 / 0312 0361