Demontage und Montage, Motor komplett Disassembly and re-assembly of complete engine Dйmontage et remontage, moteur complet Desarmado y ensamblado, motor completo English Franзais Espacol Idler gear / governor Pignon intermйdiaire / Rйgulateur Rueda intermedia / Regulador 18. Wet threaded bore of fastening bolt in crankcase with locking compound DEUTZ DW 59 DEUTZ DW 59 DEUTZ DW 59 DEUTZ DW 59 DEUTZ DW 59. Insert intermediate gear for governor complete with bearing journal. 18. Enduire lйgиrement le taraudage de la vis de fixation dans le carter moteur de produit de freinage DEUTZ DW 59 DEUTZ DW 59 DEUTZ DW 59 DEUTZ DW 59 DEUTZ DW 59.
Insйrer le pignon intermйdiaire du regulateur avec le tourillon. 18. Untar con un poco de freno lнquido DEUTZ DW 59 DEUTZ DW 59 DEUTZ DW 59 DEUTZ DW 59 DEUTZ DW 59 el taladro roscado del tornillo de fijaciyn en el bloque motor. Colocar en su sitio la rueda intermedia del regulador con el mucyn de soporte. Nota: Untar con muy poco aceite el punto de apoyo de la rueda intermedia. El aceite no debe entrar en contacto con el freno lнquido del tornillo de fijaciyn. Note: Lightly oil bearing point of intermediate gear. Oil must not come into contact with the locking compound for the fastening bold. Nota: Huiler lйgиrement la portйe du pignon intermйdiaire.
L ’huile ne doit pas entrer en contact avec le produit de freinage de la vis de fixation. 19. Insert fastening bolt and tighten. 19. Insйrer la vis de fixation et la serrer. 19. Meter el tornillo y apretarlo. Tightening specification: Initial tightening torque ____ 30 Nm Final tightening angle _____ 90° Prescription de serrage: Prйserrage ______________ 30 Nm Serrage d й finitif __________ 90° Prescripciyn de apriete: Prйserrage ______________ 30 Nm Reapriete _______________ 90° Control rod Crйmaillиre Cremallera 20. Fit control rod with guide bushing 20. Monter la crйmaillиre avec la douille de guidage. 20. Introducir la cremallera con el casquillo de guнa. 4 21.
Screw in screw and tighten according to tightening specification. 21. Insйrer la vis et la serrer selonprescription de serrage. 21. Enroscar el tornillo y apretarlo. Specified tightening torque: 10 + 2 Nm Prescription de serrage: 10 + 2 Nm Prescripciyn de apriete: 10 + 2 Nm © 2003 / 0312 0361 4.00.20.6