Deutz — Unbenannt

Bauteile ab- und anbauen Removal and re-installation of components Dйmontage et remontage des composants Desmontaje y montaje de componentes Wellendichtringe Shaft seals Joints d’arbre Retenes para cigьecal English Franзais Espacol 8. Slightly oil seal lip. Carefully put on new shaft seal. 8. Enduire lйgиrement d’huile la lиvre d’йtanchйitй. Avec prйcaution, poser le joint d’arbre neuf. 8. Untar con un poco de aceite el labio de obturaciyn. Colocar el retйn nuevo con todo cuidado. Note: Sealing lip faces crankshaft. Nota: La lиvre d’йtanchйitй est dirigйe vers le vilebrequin. Nota: El labio de obturaciyn debe indicar hacia el cigьecal. 9. Place spacer washers 9. Poser des bagues entretoise.

9. Colocar arandelas distanciadoras. 2 washers _ Initial assembly 1 washer __ 1 st repair mounting depth 0 washers _ max. mounting depth 2 bagues ______ premier montage 1 bague _______ 1иre profondeur d’insertion, cote rйp. 0 bague _______ profondeur d’insertion maxi 2 arandelas _____ primer montaje 1 arandela ______ profundidad de montaje 1 a repar. sin arandelas ____ profundidad de montaje mбх. 10. Mount assembly tool for front crankshaft seal 142 670 and press into device as far as it will go. 10. Monter la douille de montage 142 670 et la presser dans le dispositif jusqu’en butйe. 10. Colocar el manguito de montaje 142 670 e introducirlo a presiyn hasta el tope en el dispositivo. Note:

The shaft seal sits now in its pre-selected mounting depth. Nota: Le joint d’arbre se trouve maintenant а la profondeur d’insertion voulue. Nota: El retйn se encuentra ahora a su profundidad de montaje preseleccionada. 11. Make sure the centering bush is installed in the crankshaft, install as necessary. 11. Veiller а la prйsence de la douille de centrage dans le vilebrequin, le cas йchйant la monter. 11. Prestar atenciyn a la existencia del casquillo de centraje en el cigьecal; si no existe, introducirlo. 5 5.00.03 © 2002 / 0312 0361