hitachi — PREPARATION FOR PERFORMANCE TESTS

TROUBLESHOOTING/ Monitor Unit Screen Display when Maintenance Information Display is ON When only one item applies 1. If turning the key switch to the ON position, the starting screen appears. Then, the scheduled maintenance screen for the item whose change interval has expired appears for three to ten sec- onds. Finally the primary screen appears. (In the right example, Hydraulic Oil applies.) NOTE: for a machine which the primary screen is displayed according to a password on , the scheduled maintenance screen for the item whose change interval has expired appears for three to ten seconds, after the password is input successfully and the confirm key is pushed.

And then the primary screen ap- pears. 2. If data is rest, push the reset key while the scheduled maintenance screen is displayed. The message "Reset Data. OK?" appears. Then, push the confirm key. The value of remaining hours is reset to that of change interval. previous change date/hour is updated with current date and time. T1V1-05-01-115 Starting Screen Back Key Reset Key T1V5-05-01-170 Maintenance Information Display Screen NOTE: When pushing the back key while the maintenance information display screen is displayed, return to the primary screen. NOTE: When pushing the back key while reset screen is displayed, return to the mainte- nance information display screen.

Back Key Confirm Key T1V5-05-01-171 Reset Screen Menu Key Primary Screen T1V1-05-03-001 T5-2-52 B R C