TROUBLESHOOTING / Dr. ZX SETTING Engine speed, pump delivery flow rate, solenoid valve output pressure and so on can be adjusted. IMPORTANT: When turning the key switch to the OFF position with the ATT mode memory ON/OFF Selection OFF, the selected work mode becomes inef- fective and returns to the digging mode. Next time, the work mode should be selected.
When turning the key switch to the OFF position with the ATT mode memory ON/OFF Selection ON, the selected work mode becomes effective T5-3-16 Item Data Unit Parameter Change Li Speed Adjustment Adjustment of minimum engine speed min-1 WU Speed Adjustment Adjustment of warming up engine speed min-1 AI Speed Adjustment Adjustment of auto-idle engine speed min-1 E Speed Adjustment Adjustment of E mode engine speed min-1 P Speed Adjustment Adjustment of P mode engine speed min-1 HP Speed Adjustment Adjustment of HP mode engine speed min-1 Pump PQ Torque Adjustment Adjustment of P-Q curve N⋅m Pump P1 Torque Adjustment Adjustment of 1P-Q curve N⋅m Pump P2 Torque Adjustment Adjustment of 2P-Q curve N⋅m ATT Speed Increase Down Waiting Time Setting of time required for engine speed decrease ms ATT Torque Down ON/OFF ON/OFF of torque down control when a front at- tachment is operated ON, OFF ECO Control Selection ON/OFF of ECO Control ON, OFF HP Control Selection ON/OFF of HP Control ON, OFF Engine Control Theft Prevention Selection ON/OFF of engine control theft prevention ON, OFF Pump Control Theft Prevention Selection ON/OFF of pump control theft prevention ON, OFF Min.
Boom CYL. Bottom Pressure Over Bal- ance Setting of minimum boom cylinder bottom pressure over balance MPa Adjustment of Auto-lubrication interval Adjustment of Auto-lubrication interval min Adjustment of Pump 1Min. Capacity Adjustment of Pump 1 delivery flow rate cm3 Adjustment of Pump 2 Min.
Capacity Adjustment of Pump 2 delivery flow rate cm3 Adjustment of Pump Cut-off Pressure Adjustment of relief oil flow decrese control MPa Adjustment of Pump 1 Regulator Pressure Offset Pressure Adjustment of Pump 1 delivery flow rate MPa Adjustment of Pump 2 Regulator Pressure Offset Pressure Adjustment of Pump 2 delivery flow rate MPa Adjustment of Boom Oil Flow Control Elec- tric Current Adjustment of solenoid valve unit (SF) mA ATT Mode memory ON/OFF Switch ON/OFF of att mode memory ON, OFF