SAFETY EVACUATING IN CASE OF FIRE If a fire breaks out, evacuate the machine in the following way: • Stop the engine by turning the key switch to the OFF po- sition if there is time. • Use a fire extinguisher if there is time. • Exit the machine. In an emergency, if the cab door or front window can not be opened, break the front or rear window panes with the emergency evacuation hammer to escape from the cab. Refer the explanation pages on the Emergency Evacuation Method. SA-393 18-E02B-0393 SA-393 BEWARE OF EXHAUST FUMES Prevent asphyxiation. Engine exhaust fumes can cause sick- ness or death. • If you must operate in a building, be sure there is ad- equate ventilation.
Either use an exhaust pipe extension to remove the exhaust fumes or open doors and windows to bring enough outside air into the area. 509-E01A-0016 PRECAUTIONS FOR WELDING AND GRINDING SA-016 Welding may generate gas and/or small fires. • Be sure to perform welding in a well ventilated and pre- pared area. Store flammable objects in a safe place before starting welding. • Only qualified personnel should perform welding. Never allow an unqualified person to perform welding. Grinding on the machine may create fire hazards. Store flammable objects in a safe place before starting grinding.
After finishing welding and grinding, recheck that there are no abnormalities such as the area surrounding the welded area still smoldering. SA-818 523-E01A-0818 S-27