TROUBLESHOOTING / Troubleshooting A T5-6-25 Presumptive Symptoms in Real Machine Operation Assumptive Conditions at Back-up Fault Code (Tech 2) Reference Page on Engine Trouble- shooting Manual • At normal temperature: Black smoke emission at starting, greater engine com- bustion noise are possible. • During idling at atmospheric tempera- ture: Rough idling, engine stall, white smoke emission • Coolant temperature de- fault setting. (at starting: -20 °C, at running: 80 °C) P0118 1E-233 • Start ability deteriorates at low tempera- ture • Black smoke emission is possible • Output lowering depending on conditions • Coolant temperature de- fault setting. (at starting: -20 °C, at running:
80 °C) P0117 1E-227 • Intense engine vibration • Rough idling • Output lowering • Blow up fault • Black smoke emission • Excessive output • Limited injection amount 3 (Multi-injection stopped) • Target rail pressure: Upper limit (80 MPa) P0088 1E-179 • Intense engine vibration • Rough idling • Output lowering • Blow up fault • Black smoke emission • Excessive output • Limited injection amount 3 (Multi-injection stopped) • Target rail pressure: Upper limit (80 MPa) P0088 1E-179 • Intense engine vibration • Rough idling • Output lowering • Blow up fault • Black smoke emission • Excessive output • Limited injection amount 3 (Multi-injection stopped) • Target rail pressure:
Upper limit (80 MPa) P0089 1E-184 • Output lowering • Black smoke emission • Engine stall is possible. • Actual rail pressure default setting (80 MPa) • Rail pressure feedback control stopped • Limited injection amount 2 (Multi-injection stopped) P0193 1E-260 • Engine blow up • Actual rail pressure default setting (80 MPa) • Rail pressure feedback control stopped • Limited injection amount 2 (Multi-injection stopped) P0192 1E-254