hitachi — PREPARATION FOR PERFORMANCE TESTS

TROUBLESHOOTING / Troubleshooting A Discontinuity Check in CAN Harness IMPORTANT: Before continuity check, turn the key switch OFF. In case of continuity, the circuit between CAN (high side) circuit and CAN (low side) circuit is shorted. In case of discontinuity, the circuit is normal. Connector MC-C Check for continuity between terminals #C4 and #C15 of harness end of connector MC-C in MC. MC Connector MC-C (Harness end) #C15 #C4 C1 C10 C23 C31 • Connector ECM Check for continuity between terminals #18 and ECM Connector (Harness end) #37 of harness end of connector in ECM. #18 #37 T1GR-05-04-002 T5-6-62