hitachi — PREPARATION FOR PERFORMANCE TESTS

TROUBLESHOOTING / Troubleshooting B T5-7-4 Parts Pressure Sensor (Arm Roll-In) Pressure Sensor (Bucket Roll-Out) Pressure Sensor (Bucket Roll-In) Function • Monitors arm roll-in pilot pressure. (HP mode control, boom mode selector control and boom mode flow rate control valve control) • Monitors bucket roll-out pilot pressure. (Boom mode se- lector control and boom mode flow rate control valve control) • Monitors bucket roll-in pilot pressure. (Boom mode se- lector control and boom mode flow rate control valve control) Symptoms in control system when trouble occurs. • No signals arrive to MC. • No signals arrive to MC. • No signals arrive to MC.

Symptoms in machine operation when trouble occurs. • Even if arm is rolled in with auto-idle switch ON, engine speed does not increase. • Engine speed becomes be- low E mode speed (1580 min-1). • Even if arm is rolled in with power mode switch in HP mode position, engine speed does not increase. • Even if arm is rolled in with boom mode selector switch ON, boom mode selector control is inoperable. (Ma- chine vibrations are many.) • Even if bucket is rolled out with auto-idle switch ON, en- gine speed does not in- crease. • Engine speed becomes be- low E mode speed (1580 min-1). • During combined operation of boom lower and bucket roll-out, speed of bucket roll-out is slow.

• Even if bucket is rolled out with boom mode selector switch ON, boom mode se- lector control is inoperable. (Machine vibrations are many.) • Even if bucket is rolled in with auto-idle switch ON, en- gine speed does not in- crease. • Engine speed becomes be- low E mode speed (1580 min-1). • During combined operation of boom lower and bucket roll-in, speed of bucket roll-in is slow. • Even if bucket is rolled in with boom mode selector switch ON, boom mode se- lector control is inoperable. (Machine vibrations are many.) Evaluation By MC Fault Code Fault Code 11303 is displayed. Fault Code 11997 is displayed. Fault Code 11999 is displayed. By Monitor Function Monitor Item:

Arm Roll-In Pilot Pressure Monitor Item: Bucket Roll-Out Pilot Pressure Monitor Item: Bucket Roll-In Pilot Pressure Using Test Harness - - - Others - - - NOTE • Judge if pressure sensor is faulty or port is clogged by switching pressure sensor with another pressure sensor. • Judge if pressure sensor is faulty or port is clogged by switching pressure sensor with another pressure sensor. • Judge if pressure sensor is faulty or port is clogged by switching pressure sensor with another pressure sensor. Descriptions of Control (Operational Principle Section in T/M) T2-1 T2-1 T2-1