TROUBLESHOOTING / Troubleshooting B ENGINE SYSTEM TROUBLESHOOTING E-1 Starter does not rotate. IMPORTANT: As electric current from the key switch is not routed to starter relay 2 with the pilot shut-off lever in UNLOCK position, the starter does not rotate. (Refer to “Electrical System”.) This trouble has nothing to do with the electronic control system such as MC. Key Switch: Battery Relay: Terminal A T178-05-04-001 T105-07-04-002 T5-7-36 Check the wiring connections first. YES Faulty starter cut relay. Switch starter cut relay YES with other general re- lay. Remove starter cut relay. Check if starter rotates.
Check if voltage at ter- minal #3 of harness end Check if both voltages · Key switch: START NO of connector is 24 V. YES at key switch termi- · Key switch: START nals #5 and #6 are 24 V. · Key switch: START YES Faulty key switch. Check if battery voltage Check for continuity and electrolyte density is between battery posi- normal, and fusible link (45 tive terminal and key A) is not blown. NO switch terminal #1. Faulty harness between · Voltage: 24 V or more battery and key switch. NO Density: 1.26 or more Faulty battery or faulty NO fusible link. Faulty starter cut relay. Faulty battery or faulty fusible link. NO YES Faulty key switch.