hitachi — PREPARATION FOR PERFORMANCE TESTS

TROUBLESHOOTING / Troubleshooting B E-12 Engine is difficult to start at low tempera- ture. (During cold weather or in cold dis- tricts, engine is difficult to start or does not start even if pre-heated.) Related MC Fault Code: None Check if electricity is routed to the glow plugs. Check the glow plugs for any abnormality. The pre-heat system operates only when coolant temperature is below 20 ° C (68 ° F). Measurement of Glow Plug Voltage and Resistance Check the battery. Check the wiring connections first. YES Faulty sensor. Disconnect connector of coolant temperature sensor. Check if voltage at glow plug is 20 to 24 V. YES Faulty ECM. · Key switch: ON Disconnect connector in ECM.

Connect terminal #10 of harness end of connector to machine. Check if prob- lem is corrected. NO · Connect to machine from the back of connector by using a clip with the con- nector connected. Measure each glow plug resistance. NO · Key switch: OFF · Before measuring, re- move copper plates connecting each glow plug. Voltage Check Resistance Check Remove the copper plate. Specification: Below 10 Ω Specification: 20 to 24 V T105-07-04-006 T105-07-04-007 T5-7-52