hitachi — PREPARATION FOR PERFORMANCE TESTS

TROUBLESHOOTING / Troubleshooting B EXCHANGE INSPECTION Exchange inspection method is a troubleshooting method to find the trouble location by exchanging the suspected part / component with another part / com- ponent having identical characteristics. Many sensors and solenoid valves used on this ma- chine are identical. Therefore, using this switch-check method, faulty part / component, and/or harness can be easily found. Example: Abnormal pump 1 delivery pressure (Fault code: 11200) Check Method: 1. Switch two delivery pressure sensors located as shown in figure A to figure B. 2. Retry troubleshooting. Result:

In case the pump 2 delivery pressure is abnormal (fault code 11202), the pump 1 delivery pressure sensor is considered to be faulty. In case the pump 1 delivery pressure is abnormal (fault code 11200), the pump 1 delivery pressure sensor harness is considered to be faulty. T16J-05-04-003 T16J-05-04-003 T5-4-116 5P 4P Pump 1 ump 2 (4-Spool 5-Spool Section) ection) Pump 1 (4-Spool Section) Pump 2 (5-Spool Section) ump 2 5-Spool ection) Figure A 4P 5P Pump 1 ump 2 (4-Spool 5-Spool Section) ection) Pump 1 (4-Spool Section) Pump 2 (5-Spool Section) ump 2 5-Spool ection) Figure B