hitachi — PREPARATION FOR PERFORMANCE TESTS

OPERATIONAL PERFORMANCE TEST / Standard SENSOR ACTIVATING RANGE 1. Checking Method Hydraulic Oil Temperature: 50 ± 5 ° C Unless specified: Auto-Idle/ Auto-Acceleration Selector Maximum Speed OFF Engine Control Dial Monitor each sensor using Dr. ZX. 2. Sensor Activating Range T4-2-15 Power Mode Switch Work Mode Switch P Mode Digging Mode Sensor Operation Specification Engine Control Dial Minimum Speed 0.3 to 1.0 V Maximum Speed 4.0 to 4.7 V Pressure Sensor Control Lever: Neutral Pilot Control Shut-Off Lever: LOCK 0 to 0.049 MPa (0 to 0.5 kgf/cm2) Control Lever: Full Stroke Pilot Control Shut-Off Lever: UNLOCK 2.45 to 3.9 MPa (25 to 40 kgf/cm2) Pump Regulator Pressure Sensor Control Lever:

Neutral Pump 1: 0.49 MPa (5.0 kgf/cm2) Pump 2: 0.44 MPa (4.5 kgf/cm2) Jack-up, High Speed Travel 1.76 to 2.55 MPa (18 to 26 kgf/cm2) Pump Delivery Pressure Sensor Control Lever: Neutral *0.3 to 0.5 MPa (3 to 5 kgf/cm2) Boom Raised and Cylinder Relieved 31.9+1 MPa (325+10 kgf/cm2) -0 -0