OM4057 10/09 Lubrication and Service - Section 40 Page 40-5 10 HOUR (DAILY) INSPECTIONS (Cont.) 7. 8. 9. 10. Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIALS COOLING AIR DUCTWORK - Inspect the ductwork from the blower to the rear axle. Ensure that the ductwork is secure, undamaged and unrestricted. AIR INTAKE PIPING - Check all mounting hardware, joints and connections. Ensure that there are no air leaks and all hardware is properly tightened. AIR CLEANERS - Check the air cleaner restriction gauges in the operator cab.
The air cleaners should be serviced if the gauges show a maximum restriction of 25 inches of H O vacuum. 2 Refer to the shop manual for servicing instructions for the air cleaner elements. Empty the air cleaner dust caps. After service, push the reset button on face of gauges to return the gauge to zero. DRIVE SYSTEM COOLANT - Check the sight gauges inside the drive system control cabinet. The upper sight gauge should be 1/2 full. If necessary, add coolant. Use Antifrogen only. CAB AIR FILTER - In extremely dusty conditions, check this filter daily and service as frequently as required. See the 250 Hour Lubrication and Maintenance Checks for the cleaning procedure.