Komatsu — Connection Menu

Payload Meter III - Section 60 OM6012 Page 60-14 PLM III SYSTEM CONFIGURATION Click “Done” to return to the main menu. From the main menu, select "Connect to Payload Meter". The computer will try to connect to the payload meter and request basic information from the system. In the event of communications trouble, the computer will try three times to connect before "timing out". This may take several seconds. Starting Communications Connection Menu Before connecting to the payload meter, select "Change Program Options". Confirm that the program has selected the correct Com Port. Most laptop computers use Comm 1 for serial communications.

Three options are available for the displaying payload units in the software, reports, and graphs: The connection screen displays basic system information to the user. Short Tons: Payload is displayed in short tons, distances and speeds will be displayed in miles. Frame S/N should be the same as the truck serial number from the serial plate located on the truck frame. Truck Number is an ID number assigned to the truck by the mine. Payload Meter Date / Time values come from the payload meter at the moment of connection. Number of Haul Cycle Records is the number of haul cycles records stored in memory and available for download.

Number of Active Alarms shows how many alarms are currently active in the system at the time of connection. If there are active alarms, the "Display Active Alarms" button is available. Number of Inactive Alarms shows how many alarms have been recorded in memory and are available for download. PLM Software Version displays the current version of software in the payload meter. Metric Tons: Payload is displayed in metric tons, distances and speeds are displayed in kilometers. Long Tons: Payload is displayed in long tons, distances and speeds are displayed in miles. Two options are available for displaying time units in the software, reports, and graphs: Minutes and Seconds:

Five minutes and thirty-two seconds = 5:32 Decimal Minutes: Five minutes and thirty-two seconds = 5.53 The information on the connection menu comes from the configuration of the payload system on the truck. There are also many configuration and download options available from this screen. The Connection Menu is updated only when the connection is first made. It does not update automatically. To view changes made while connected, the user must close the window and reconnect to the payload meter. The connection menu is displayed after a serial connection has been established and the PDM software has connected to the payload meter.