OM6012 Payload Meter III - Section 60 Page 60-21 Reports can be generated and viewed on-screen or printed. These reports are generated from the query displayed on the Payload Summary screen. From the example in Sorting on Time Range , the report printed would only contain data from truck 374 during the month of July 2000, from 8:00 AM to 5:00 PM. Creating Reports It is important to carefully select the query data and click on "Query Database & Display" before printing a report. NOTE: Some haul cycles may contain the Sensor Input warning flag. This indicates that one of the four pressure sensors or inclinometer was not functioning properly during the haul cycle.
Haul cycles with this warning are displayed in red on the Payload Summary window and are not included in the summary statistics for reports or display. Summary (one-page report): A summary of the queried data can be printed onto one page. The cycle data is summarized onto one sheet. Displayed is the speeds, cycle times, load statistics, frame and tire data. Detailed (multi-page report): The detailed report starts with the summary report and follows with pages of data for each haul cycle. The detailed report prints date, time, payload, cycle times, and cycle distances, speeds and the number of swing loads.