Komatsu — Propulsion System Not Ready

Operator Cab And Controls - Section 32 9/09 OM3232 Page 32-16 STATUS INDICATOR LIGHTS FIGURE 32-8. STATUS INDICATOR LIGHTS 1. Body Up 2. Parking Brake Applied 3. Propulsion System Not Ready 4. No Propel 5. Engine Warming Up 6. Engine Shut Down Timer 7. Grid Drier 8. Wheel Brake Lock Applied 9. Traction Control 10. Repair Monitor 11. Snapshot In Progress 12. Pantograph Energized 13. Pantograph Up 14. Service Brake Applied 15. Dynamic Retarding 16. No DC Link Voltage When lighted, these amber (yellow) status lights alert the operator that the indicated truck function requires some precaution. Refer to Figure 32-8 and the following descriptions for explanations of the symbols.

Parking Brake Applied Indicator light (2, Figure 32-8) will illuminate when the parking brake is applied (directional control lever is in PARK). Do not attempt to drive the truck with the parking brake applied. Body Up Indicator light (1, Figure 32-8) will illuminate when the body is not completely down on the frame. The truck should not be driven until body is down and the light is off. Propulsion System Not Ready Indicator light (3, Figure 32-8) functions during start-up much like the hourglass icon on a computer screen. This light indicates that the computer is in the process of performing the self-diagnostics and set-up functions at start-up.

Propulsion will not be available at this time.