OPERATION 3.5 CAMERA SYSTEM WITH MONITORS Operating the Monitors Legend for illustration Z25088 LCD Monitor -D- (1) Power LED. With ignition key in ON position the LED lights up to indicate the stand-by modus (2) Power ON - OFF switch. This switch is used for switching the display on and off (3) Remote control sensor. The monitor can also be operated with a remote controller. To operate the monitor point the remote controller towards the sensor. (4) Brightness sensor. (Day/Night automatic brightness control) The brightness of the display is automatically adjusted according to the light conditions.
This function is only available with Day/ Night switch (9) in ON position (5) Camera selection button. This function is not used (6) Menu button. By pressing this button the selectable menu functions appear on the monitor. The menu will disappear after 5 seconds if no further button is actuated. Select the desired function with buttons (8) CH: SCALE -Evaluation scale- (Not used) CA1 -Mirror- AUTO TIME (Not used) COLOR BRIGHTNESS CONTRAST (7) Volume button. This function is not used (8) CH-Menu selection buttons. Displayed menu functions can be selected with these arrow buttons (9) Day/Night switch ON - OFF. Switch for automatic brightness control (10) Input terminal.
Connector for control unit cable (11) Rail for monitor bracket. Adjustable Ajustments of the Monitor 1. SCALE CONTROL (Not used) 2. CAMERA MIRROR CONTROL Selection of mirror or normal image. 1. Press the MENU button (6). 2. Select CA1 (MIRROR) or CA1 (NORMAL) with buttons CH. 3. Choose the desired function with button CA. SEL. 4. Press the MENU button. 3. AUTO TIME CONTROL (Not used) 129