Komatsu — 3.16 PARKING THE SHOVEL

OPERATION 3.16 PARKING THE SHOVEL 3.16 PARKING THE SHOVEL Park the machine at a safe place on level and solid ground. Lower the working attachment onto the ground in a position as shown on the oil level plate at the hydraulic oil reservoir. Stop the engines and relieve the pressure in the hydraulic system, see page 209 for more information. Move the lock lever fully to the rear in locked position. DO NOT leave the Operator’s Cab when the engines are run- ning. Be sure to lock the operator’s cab door before leaving the Shovel. If the Shovel has to be parked on steep terrain, the track groups must be secured with wedges.

Before leaving the Shovel make sure that the parked machine does not impair local requirements, have consideration for other mining traffic. CLEANING THE TRACK GROUPS Under working conditions with excessive material build up on the crawler components, cleaning of the crawlers is very important to prevent damage. Material build up on guide wheels, drive sprockets and tracks can lead to over tensioning of the tracks, resulting in severe damage to these components. If there is danger of frost, the tracks must also be cleaned. NOTICE Use a suitable cleaning device for removing dirt, mud and debris from the tracks, rollers, guide wheels and sprockets. 205 WARNING WARNING