4.4 FILLING CAPACITIES MAINTENANCE 4.4 FILLING CAPACITIES *1) Oil change quantity including suction oil tank and return oil col- lector pipes approximately 4450 liter with loader attachment in oil level checking position, see oil level plate on the main hydraulic oil reservoir. *2) Fill up to level gauge marking. Capacities listed above are approximate values. For proper checking use level plugs, dipsticks, and inspection openings provided for this purpose. Prior to commissioning check the fluid levels in all units and systems listed above. 258 Unit or System Liter (approx.) Unit or System Liter (approx.) Cooling System Swing Gears made by L&S, each:
42.0 Front Engine 360.0 Motor Adapter Housings 0.6 Rear Engine 360.0 Swing Gears made by Sieben- haar, each: 60.0 Engine Oil Motor Adapter Housings *2) Front Engine Oil Pan 190.0 Brake Housings 0.2 Front Engine Reserve Tank (Refill) 580.0 (425.0) Travel Gears made by L&S, each: Travel Gears made by ZOLLERN, each: 155.0 180 Rear Engine Oil Pan 190.0 Motor Adapter Housings, made by L&S, each: Motor Adapter Housings, made by ZOLLERN, each: 2.0 0.5 Rear Engine Reserve Tank (Refill) 580.0 (425.0) REMARK The travel gear brakes are dry type multiple disk brakes. DO NOT fill the housings with oil.
Fuel Tank 10800.0 Final drive housings, each 165.0 Hydraulic Oil Reservoir 3600.0 *1) Guide Wheels, each 3.2 Total Hydraulic System 6600.0 Support Rollers, each 7.0 Pump Distributor Gears, each 95.0 Track Rollers, each 2,7 Oil Collector Reservoir, Auxiliary Hydraulic Pumps 1.0 Water tank for hand wash sink in Operator’s cab 50.0 Main Hydraulic Pumps, Drive Shaft Housing 1.5 Water reservoir for windshield washer 7.0