Komatsu — 4.8.1 WALK - AROUND INSPECTION

MAINTENANCE 4.8 EVERY 10 OPERATING HOURS OR DAILY Walk - around Inspection (continued) Legend for illustration Z22881 (14) Check condition, fastening and security of the auto- matic lubrication system grease container. (15) Make a visual inspection of the engine room. Check engine oil level and coolant level. Check engine for good condition and security. Check for oil and fuel leakages. Check fuel hoses, hose lines and fittings for leakage and damage. Engine mounts, check for good condition and correct fastening. Check radiator coolant level. Check cooling system for leakage, damaged hoses and connections. Check housing of radiator fan bearing for leakage.

Check fan guards and coverings for correct installa- tion, good condition and security. Check flexible coupling between engine and PTO for leakage. Check condition and mounting of PTO and hydraulic pumps. Check hydraulic hoses, hose lines and fit- tings for leakage and damage. Check housing of oil cooler fan bearing for leakage. Check fan guards and coverings for correct installa- tion, good condition and security. Check hydraulic hoses, hose lines and fittings for leakage and dam- age. Check hydraulic oil cooler for plugged cores. Check hydraulic oil level. Check hydraulic oil reser- voir for leakage, damaged hoses and connections. Check condition and fastening of control valves.

Check hydraulic hoses, hose lines and fittings for leakage and damage. NOTICE If any damages, failures or wrong condition, have been found during the inspection, corrective action must be taken. 297