Komatsu — 4.9.2 TRAVEL GEARS, MOTOR ADAPTER HOUSINGS AND FINAL DRIVES CHECK OIL LEVELS

MAINTENANCE 4.9 EVERY 50 OPERATING HOURS OR WEEKLY TRAVEL GEAR BOX - CHECK OIL LEVEL Illustration Z25892: Remove oil level gauge (2A) or (2B) and wipe it clean. Insert the gauge and remove again. Oil level should be at the upper mark of gauge (2A) or (2B). If necessary add oil through filler opening (3). Insert gauge (2A) or (2B) and filler plug (3) and tighten securely. Check breather filter (18), illustration Z25243 on page 319 for restriction. If necessary, remove breather filters, blow out with compressed air from inside to outside and reinstall. MOTOR ADAPTER HOUSINGS - CHECK OIL LEVEL Check oil level by removing oil level plugs (8). Oil level should be at lower edge of openings (8).

If necessary, remove connector (9) for breather filter line and add oil through filler opening. Install level plugs (8) and screw in breather filter line connectors (9). Check breather filter (19), illustration Z25243 on page 319 for restriction. If necessary, remove breather filters, blow out with compressed air from inside to outside and reinstall. FINAL DRIVE HOUSING - CHECK OIL LEVEL Remove oil level gauge (13) and wipe it clean. Screw in the gauge and remove again. Oil level should be at the upper mark of gauge (13). If necessary add oil through filler opening (14). Insert gauge (13) and filler plug (14) and tighten securely.

Check breather filter (20), illustration Z25243 on page 319 for restriction. If necessary, remove breather filters, blow out with compressed air from inside to outside and reinstall. 317