Komatsu — 4.12.1 HIGH STRENGTH BOLT CONNECTIONS - CHECK TORQUE LOAD

MAINTENANCE 4.12 EVERY 1000 OPERATING HOURS OR EVERY 6 MONTH High-Strength Bolt Connections (continued) Check condition and fastening of travel gears, sprockets and travel motors Legend for illustration Z 25249 - A - View of the RH Final drive. The configuration of the LH Final drive is the same.

(1) Travel gear (2) Sprocket (3) Travel motors (4) Outer sprocket bearing (5) Inner sprocket bearing (6) Mounting bolts for travel gear to crawler carrier (7) Mounting bolts for sprocket to hub (8) Mounting bolts for travel motors (9) Mounting bolts for outer bearing to crawler carrier (10) Mounting bolts for inner bearing to crawler carrier *1) SW = Wrench size *2) Quantity for both final drives Re-tighten mounting bolts to their correct torque and replace missing or damaged bolts. NOTICE If the outer bolts (9) have been found loose, it is necessary to check also the inner bolts (10) for looseness. For this purpose the travel gear assy has to be removed.

Contact your Komatsu Dealer for support. 397 Reference No.: Bolt size mm Grade SW *1) mm Tightening torque Nm Qty. *2) (6) M36 10.9 55 3100 80 (7) M36 10.9 55 3100 72 (8) M16 10.9 24 265 32 (9) M30 10.9 46 1770 24 (10) M30 10.9 46 1770 24