MAINTENANCE 4.12 EVERY 1000 OPERATING HOURS OR EVERY 6 MONTH FILTER SERVICE High Pressure Filters "HPF", illustration Z 21780 NOTICE The filter reference numbers (1 - 6) correspond to the numbering of the main pumps. If, for example, the fault message "High pressure filter #5 restricted" is being displayed on the VHMS screen, the filter number (5) in the illustration has to be serviced. The engine will be shifted automatically to low idle speed. Stop work and inform Service staff about the fault mes- sage.
Legend for illustration Z 21780 (1) HPF for pump 1 (2) HPF for pump 2 (3) HPF for pump 3 (4) HPF for pump 4 (5) HPF for pump 5 (6) HPF for pump 6 (7) Drain plug (8) Filter case (9) Hexagon (10) Filter element (11) Packing ring (12) O-ring (13) Back-up ring (14) O-ring (15) Filter header Clean or replace high pressure filter elements: 1. Place working attachment on the ground and shut-off the engines. Relieve pressure in the hydraulic system with several move- ments of the control levers. 2. Place a suitable container below the filter in order to collect outflowing oil. 3. Remove plug (7) and drain the oil. 4. Screw off filter case (8). 421