MAINTENANCE 4.14 EVERY 3000 OPERATING HOURS HOWEVER AT LEAST ONCE A YEAR Establish the correct Oil Level in Swing Gears, Brake Housings and Motor Adapter Housings Legend for illustration Z26332 I Front swing gear II Rear swing gear (A) Position of oil level gauge for checking the oil level in swing gears and motor adapter housings (B) Position of oil level gauge for checking the oil level in brake housings (4) Oil level gauges for swing gears (6) Oil level gauges for motor adapter housings (8) Oil level gauges for brake housings (11) Drain coupling or evacuation nozzle for Wiggins system (12) Chain to secure rear gear access hatch (13) Rear gear access hatch Swing Gear Oil Level REMARK To access the rear swing gear (II), illust.
Z26332, raise the access hatch (13) in the walkway and secure against accidental falling using chain (12). 1. Remove oil level gauge (4) of both swing gears and wipe it clean. 2. Insert the gauge but DO NOT screw in, see detail -A-. 3. Remove the gauge. The oil level should be at the upper mark of gauge (4). 4. If necessary add the specified gear oil through the filler pipe. 5. Insert both gauges (4) and tighten securely 6. Close hatch (13) and tighten the fastening bolt. Brake Housing Oil Level 1. Remove oil level gauge (8) of both brake housings and wipe it clean. 2. Screw in the oil level gauge, see detail -B-. 3. Remove the gauge. 459