Komatsu — 4.14.1 SWING GEARS, BRAKE HOUSINGS AND MOTOR ADAPTER HOUSINGS - CHANGE OIL

MAINTENANCE 4.14 EVERY 3000 OPERATING HOURS HOWEVER AT LEAST ONCE A YEAR Establish the correct Oil Level in Swing Gears, Brake Housings and Motor Adapter Housings (continued) Brake Housing Oil Level REMARK The upper mark on gauge (8) indicates the correct oil level with the oil hot. The lower mark indicates the correct oil level with the oil cold. With cold oil, the oil level should be at the lower mark of gauge (8). With hot oil, the oil level should be just below the upper mark of gauge (8). 4. Add engine oil SAE 10 or hydraulic oil HLP 22 or HLP 32 through filler opening. DO NOT overfill the brake housing, otherwise the brake could be damaged due to overheating. 5.

Insert both gauges (8) and tighten securely. Motor Adapter Housing Oil Level 1. Remove oil level gauge (6) of both housings and wipe it clean. 2. Insert the gauge but DO NOT screw in, see detail -A-. 3. Remove the gauge. The oil level should be at the upper mark of gauge (6). 4. If necessary add engine oil SAE 10 or hydraulic oil HLP 22 or HLP 32 through filler opening. 5. Reinstall both oil level gauges and tighten securely. 461