Komatsu — 4.14.2 TRAVEL GEARS, MOTOR ADAPTER HOUSINGS AND FINAL DRIVES CHANGE OIL

MAINTENANCE 4.14 EVERY 3000 OPERATING HOURS HOWEVER AT LEAST ONCE A YEAR 4.14.2 TRAVEL GEARS, MOTOR ADAPTER HOUSINGS AND FINAL DRIVES CHANGE OIL Legend for illustration Z25892 - A - View of the RH Final drive. The configuration of the LH Final drive is the same. (1) Travel gear (2A) Oil level gauge on gears made by L&S (2B) Oil level gauge on gears made by ZOLLERN (3) Oil filler plug (4) Oil drain plug (5) Connector for breather filter line. The breather filter is located inside the center frame, see illustration Z25243 on page 319. (6) Travel brake housing REMARK The travel gear brakes are dry type multiple disk brakes. DO NOT fill the housings with oil.

(7) Motor adapter housing (8) Oil level plug (9) Connector for breather filter line, the breather filter is located inside the center frame, see illustration Z25243 on page 319. The port of connector (9) is also used as oil filler opening. (10) Oil drain plug (11) Hydraulic motors (12) Final drive housing contains the lubricating oil for sprocket bearing lubrication. (13) Oil level gauge (14) Oil filler plug (15) Oil drain plug (16) Connector for breather filter line, the breather filter is located inside the center frame, see illustration Z25243 on page 319. 463