OPERATION 3.2 CONSTRUCTION OF THE SHOVEL Legend for illust. Z 25199 NOTICE The Operator’s cab is equipped with an integrated Falling Object Protective Structure (FOPS) that meets the require- ments of ISO 3449. Any modifications on the steel structure of the cab are inadmissible. Repairs on the FOPS must only be carried out by specialists having the authorization for repair work on Falling Object Protective Structures and in accordance with the manufacturer’s repair instructions. A Rear View of Operator’s Cab (1) Door handle (2) Door latch (with door fully opened) (3) Door locking pin, engages into latch (2) when the cab door is fully opened.
(4) Light switch for access area lighting (5) Light switch for interior cab lighting (6) Air conditioner door (7) Outside Mirrors with integrated heaters, both mirrors are adjusted electrically via a control switch on the instrument panel. Refer to page 79 for more information. (8) Main Working Lights (9) Adapter for Warning Beacon B Front View of Operator’s Cab (10) Release lever for door lock (2 - 3) (11) Door opener push button (12) Lock lever, see page 59 for more information (13) Control levers for working attachment, see page 70 for more information. (14) Operator’s Seat, refer to page page 63 for more information.
(15) Upper windshield wiper (16) Lower windshield wiper Make sure the cab door is always closed when working with the Shovel. Lock the door in open position by engaging latch (2) into locking pin (3). 57 CAUTION CAUTION