. OPERATION EXPLANATION OF COMPONENTS the broadcasting stations are automatically saved in the preset memory. 3 - 72 METHOD OF PRESETTING et station. o select FM or AM, then use TUNE 1. Select the desired pres Use BAND button (9) t button (7) to select the f 2. Decide one of preset b station, and keep it pres button will be shown completed. 3. Repeat Steps 1 - 2 to pr To change the settin repeat Steps 1 - 2. If the battery is replac preset settings are operation again. It is possible to prese 1. Select the desired pres Use BAND button (9) t UNE button (7) to select the f Decide one of preset b station, and keep it pres requency of the broadcasting station.
uttons (8) to be used for the preset sed for 2 seconds. The number of the button will be shown completed. on display (3) and the presetting is eset the other broadcasting stations. 3. Repeat Steps 1 - 2 to pr eset the other broadcasting To change the settin g of a preset button to anoth er station, If the battery is replac ed or the power is switched off, a ll the deleted. Carry out the presetting t 6 FM and 6 AM stations. presetting It is possible to prese METHOD OF USING AUTO M EMORY If AST button (5) is kept pre ssed for 2 seconds, the broadcasting stations that can be receive d in the area are called up in turn , and METHOD OF SETTING TIME 1. 2. 1.
Turn the starting switch to the ON position (B), then turn radio power switch (1) ON. the frequency, press display selector time. the CLOCK button (4) pressed, and If display (3) is showing button (4) to display the 2. To set the time, keep Press the ∨ part of TU NE button (7) to change th e minutes Press the ∧ part of TUN E button (7) to change the h ours