. OPERATION EXPLANATION OF COMPONENTS DISPLAY MONITOR Monitor (7) displays the status of temperature setting (a), air flow (b), and vents (c). When OFF switch (1) is pressed, the display of temperature setting (a) and air flow (b) goes out, and operation stops. 3 - 85 AUTO SWITC With switch ents source (RECIRC/FR ESH) are a utomati cally selecte d according to the set temperature. Press switc h (5), then use te mperatur e contro l switc h (3 ) to set the temper control.
ature, and run the air conditioner under automatic When switc hing from automatic operation to manual operation, it is possib le to use the swit nd air source (RE REMARK When Auto M ode is selected, if the set t emperature is set t o 18.0 °C (64.4 °F) or 32.0 °C ( 89.6 °F), the air flow is always set to High, but t his is n ot a problem. RECIRC/FRESH SELECTOR SWI TCH Switch (6) is u sed to switch the air source between r ecirculation of the air inside the cab an d intake of fresh air f rom th e outsid e. During auto matic operation, th e selection o f inside air (RECIRC) and outside air (FRESH) is p erformed automatically.
RECIRC Outside air is shut off and only air inside the cab is circulated. Use this setting to perform rapid cooling of the cab or when outside air is dirt FRESH Outside air is taten into the cab. Use this setting to take in fresh air when performing demisting.