Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL WARNING to REMARK When inspecting, if the machine is at an angle, move it to a level place to carry out the check. 3 - 105 When remo ving the oil filler cap, oil m ay spurt out, so sto p the engine and wait for the oil temperature to go d own, then turn the c ap sl owly to release the internal pressure before re If oil has be en added to above the H m ark, stop the engine and wait for the hydraul ic oil to cool down. Then rem ove drain plug (P), loose n drain valve (1), an 1. Lower th e blade and ripper comp letely to the ground, st op t he ait for approx.

5 minutes , then check that the o il level en the H and L marks on sight gauge (G). NOTICE If the oil level is above the H line, do not add oil. Doing so If may lead damage to the oil pressure circuit and sp outing out of oil. 2. If the oil l evel is below the L line, add oil through oi l fille r (F) at the top o f the hydraulic tank.