Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION ADJUSTMENT ADJUSTING OPERATOR'S SEAT WARNING (C) Adjust reclining angle 3 - 110 Park the machine in a safe place and stop the engine when carrying out adjustment of the operator' Adjust the seat position at the b eginning of each shift or when operators change. Adjust the seat so that the brake pedal can be depres sed all the wa y down with the operator's back (A) Fore-an d-aft adjustment Pull lever (1 ), set the seat to a p osition where it is e asy to operate, then releas e the lever. .3 in) (8 stages) Fore-aft ad justment:

160 mm (6 (B) Weight and height adjustme nt of seat Turn kno b (2) under the seat so that weight adjus tment indicator (3) displ turning t ays the green range . The height can be adjusted by he knob (2) while the green range is dis Turn the knob clockwise to counterc lockwise to lower th Height adju stment range: steple Weight adj ustment range: 50 to 130 kg (110 to 23 REMARK When the s eat is pushed forwar d, the available recl ining angle b ecomes greater; when the se at is pushed back, the available re clining angle becom es smaller. When moving the backrest, return the backrest to its original position before mov ing the seat.

Pull lever ( 4) up, set the backre st to the desired po sition, then (D) Adjustin g direction of seat Pull up leve r (5) to unlock the se at. The seat can th en be turned 15 ° to the righ t. After chang ing the direction of th e seat, return the le ver securely to lock the se at. the direction of the seat to the right for the ease of n of the ripper. Change operatio