Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION ADJUST MIRROR WARNING Loosen nut (1) of the mirror and adjust the mirror to a position where it gives the best view from the operator's seat. In particular, be sure to adjust the mirror so that people at the rear left or right of the machine can be seen clearly. ADJUST JOYSTICK (PCCS LEVER) WARNING 3 - 112 Be sure to adjust the mirrors befo re starting work. If they are not adjusted properly, you cannot s ecure the visibility and m ay be injured or may injure someone se After moving case (2) in order to a djust the position of the steering, directional, and gearshift lev er, secure lock lever (1) in to the notched hole, making sure it is in the LOCK position.

If it is not completely locked, the steering, directional, and gearshift lever may unexpectedly move and caus e damage, serious injury, or death. The steering, directional, and s peed lever (wrist control type single lever: joystick) can be adjusted by 100 mm (3.9 in) in 5 stages to the front or re ar. Adjust to the most suitable positio n to match the adjus tment of the operator's seat. 1. Pull up lock lever (1) to the FREE position (F) at the rear of case (2) on left side of the operator's compartment. 2. With lock lever (1) pulled up, use your other hand to grip the front of case (2), then move it forward with your left and right hands. The joystick moves with case (2). 3.

Move case (2) to the desired position until a click is heard. Then pull up lock lever (1) and release it. Lock lever (1) automatically returns to the LOCK position (L). REMARK PCCS: Palm command control system 1. Pull up lock lever (1) to the