. OPERATION OPERATION OPERATION OPERATION range REMARK return the steering, speed range set traveling. edge of a cliff to build an the load is removed, it applied, the transmission 3 - 135 Manual shift mode Changing maxim um speed range used whe n traveling When traveling f to F1 - F3 When traveling i used to R1 - R3 orward: Possible to change speed ran up switch (a): Each time it is pressed, speed ra nge used goes one range down switch (b): Ea down one range F3L and R3L are sp eed ranges where the engi ne speed is controlled at 3rd and the speed between 2nd and 3r In automatic shift m een directional, and gea rshift lever to the Neutral p osition.
T he settin before starting to tra vel (when the transmission was at ne utral) In manual shift mod e, the preset (speed range when movi ng machine off) cannot be change NOTICE Be careful not to c ome unnecessarily close to the edge of cliffs. When dropping soil at the e embankment or lan dfill, always leave one load an d use the ne xt loa d to push the previous load ove When reaching the top of a hill, or at the instant w hen the load is dumpe d from a cliff, the load will s danger that the ma the load.
In automatic shift chine will suddenly increase s peed, so de press t he d ecelerator pedal to reduce mode, when a load is applied, the transmission automatically shifts down; wh s up to the maximum set speed range. In manual shift mode, if a load is a automatically shift automatically shifts s up to the maximum set sp In manual shift mode, if a load is a down, but when the load is re moved, the transmission does not automatically