. OPERATION OPERATION METHOD OF ANGLING BLADE WARNING 3 - 157 Angledozers only Whe n adjusting the amo unt of angling, it is da ngerous if the work equipment is moved by mistake . Set the work equipment in a saf e condition , then st op the engine and loc k the work equipment securely with the work equip Be c areful w hen removin g arm (2) . Afte r arm ( 2) is r emoved, the blade can When dozing toward on e side only, o perat e with angled blade. 1. Raise the above ground, then put blocks under the fra me so tha t the blad e doe s not come down. 2. Remove pins (1) on the left a nd r ight si des, then remove arm (2) from t he f 3.
Insert arm (2) into th e desired position o n the bracket on top of the frame (3 places on each side ), and inser t pin s (1