Komatsu — LOADING, UNLOADING WORK

. OPERATION TRANSPORTATION 3 - 168 UNLOADING 1. Load and unlo ad on firm level ground onl y. Maintain a safe distance from t he edge of a 2. Apply the traile r brakes securely, then pu t blocks (1) un der the tires to preven Set left an equally spa Make angle ramps ben machine, p bending. tires to preven t the trailer from moving. Set left an d right ramps (2) paralle ced to the left and right of c enter (3) of the trailer. of installation (4) a max imum of 15°. If the of the d a large amount under the weight ut blocks under the ramps to prevent the m from 3. Remove the c hains and wire r opes faste ning the mach 4. Start the engin Warm the engi 5.

Set main work equipment lock lever to FR EE position ( F), and raise the work (When transpo 6. Set parking br ake lever to the FREE pos ition (F). 7. Set the transm idle. ission in the 1st gear and run the engine at low 8. Set the travel direction toward the ramps and drive slowly. 9. The center of gravity of the machine s hifts suddenly at the border betwee n the ramps and trailer, and the machine is d becomes dangerous. Accordingly, pass the e ramps slowly and carefully until the machine ps perfectly. nd trailer, and the mac hine is unbalanced an border slowly. 10. Drive down th leaves the ram