Komatsu — AFTER STORAGE

. OPERATION LONG-TERM STORAGE LONG-TERM STORAGE DURING STORAGE WARNING AFTER STORAGE 3 - 177 BEFORE STORAGE ge for a long time (more than one month), do as follows. When putting the machine in stora ge for a long time (more than one month), do as follows. Clean and wash all parts, then s tore the machine indoors. If the machine has t o be store d outdoors, sel ect level ground and cover the machine w ith canvas. s prevents moisture from collecting. ore storage. etal surface of the hydraulic piston rods and the idler adjusting rods. als of the battery and cover it, or remove it from the machine and store it Completely fill the fuel tank.

Thi Lubricate and change the oil bef Apply a thin coat of grease to m etal surface of the hydraulic piston rods and t he idler adjustin Disconnect the negative termin separately. Place all control levers at the ne utral position, set the work equipment lock le ver and parking brake lev er to the lock position, and set the fuel co ntrol dial to the low idling position. To prevent rust, fill with Komatsu genuine supercoolant (AF-NAC) to give a den sity of at le ast 3 0% for th e engine coolant. If it is necessary to perform the rust-pre vention operation while the machine is indoors, op en the doors and windows to improve ventilation and prevent gas poisoning.

During storage, operate and mov e the machine for a short distance once a mon th so that a new film of oil will coat moving parts. At the same time , also charge the battery. air conditioner, run the air conditioner. For machines equipped with an NOTICE If the machine has been stored withou t carrying out the monthly rust-prevention operati on, consult your Komatsu d istributor before using it. When using the machine after long -term storage, do as follows before using it. draulic cylinder rods. ion points. Wipe off the grease from the hy Add oil and grease at all lubricat When the machine is stored for a long period, moisture in the air will mix with the oil.

Check the o il before a nd after starting the engine. If there is w ater in the oil, change all the oil.