Komatsu — OTHER TROUBLE

. OPERATION TROUBLESHOOTING 3 - 186 CHASSIS ( ) : Always contact your Komatsu distributor when dealing with these items. In cases of problems or causes which are not listed below, contact your Komatsu distributor for repairs. Problem Main causes Remedy Machine does not stop even when brake pedal is depressed ( Adjust, check, repair) Track shoe comes off Track shoe too loose Adjust track tension. See WHEN REQUIRED Abnormal wear of sprocket Track shoe too loose or too tight Blade, ripper lifting speed too slow or blade, ripper does not go up Add oil to specified level.

See EVERY 250 HOURS SERVICE Set to FREE position Swing is operated but upper structure does not swing Set to FREE position ( Check, repair) ( Check, replace) Transmission oil pressure does not rise Gear pump worn or scuffing Lack of oil in power train case Clogged oil filter element, strainer in power train case ( Check, or replace) Add oil to specified level. See Check before Starting Clean. See EVERY 1000 HOURS SERVICE Lack of traction (machine travel speed is low) See ENGINE Machine takes time to reach travel speed Carry out warming-up operation See ENGINE Lack of oil in power train case Add oil to specified level.

See Transmission oil pressure does not rise Parking brake lever at LOCK position Machine does not travel in straight line ( Adjust) ( Check, replace) Torque converter overheats (red range at top of power train oil temperature gauge lights up) Add oil to specified level. See Check before Starting See "Transmission oil pressure does not rise" above Use transmission speed range one level lower or lighten load and increase speed during operation