. MAINTENANCE SERVICE PROCEDURE LUBRICATE UNIVERSAL JOINT WARNING (F)Front of the machine CHECK ALL TIGHTENING POINTS OF ENGINE EXHAUST PIPE CLAMPS Please ask your Komatsu distributor to check the tightening of the clamps between the air cleaner - turbocharger - aftercooler - engine. 4 - 74 The undercover is heavy. Never tr y to open o r close the cover when directly beneath it . When removin g bolts( 2), carry o ut the w ork from the rear of t he cover so t hat yo u can easily get out of the Apply grease t o the grease fit tings (2 p laces) shown by arrows. Remove inspection cover (3) of the undercov er on the rear bottom of the chassis as follows. d the front of the machine. 1. 2. 3. 1.
Remove 2 bolts (1) towar d the fron t of the Support th bolts (2) at e cover the rear with yo of the ur elbow machine while gradually removing 2 . it. 3. Lowe r the cover graduall y to open