hitachi — ENGINE CONTROL

SYSTEM / Control System Heater Control Purpose: Increases the rising temperature speed of the heater in cab while increasing the engine speed at the low temperature. Engine Speed Operation: 1. When the following conditions exist and the engine starts, MC sends the signals equivalent to the target engine speed to ECM by using CAN communication. 2. ECM increases the engine speed beyond fast idle speed. Condition: Engine Control Dial: Set the engine speed at fast idle speed position. Coolant Temperature: Less than 5 ° C (41 ° F). Pumps 1, 2 Control Pressure Sensors: Both pump control pressures: 0.5 MPa (5.1 kgf/cm 2 , 73 psi) or less. Pilot Shut-off Lever: Up (Pilot Shut-off Solenoid Valve:

OFF) Increasing Range of Fast Idle Engine Control Dial Position Slow Idle Fast Idle T2-2-22 Model Increasing Range of Fast Idle Speed ZX200-3 class 100 min−1 ZX225US-3 class ZX225USR-3 class 200 min−1 ZX240-3 class ZX270-3 class 100 min−1 (HP mode engine speed)