hitachi — PUMP CONTROL

SYSTEM / Control System Attachment Pump Torque Decrease Control (Only Machine Equipped with Attachment) Purpose: When average pump delivery pressure becomes high while operating the attachment (secondary crusher or primary crusher), driving torque of pumps 1, 2 is decreased and pump delivery pressure is reduced in order to prevent hydraulic oil temperature from rising while operating the attachment. Operation: 1. When the following conditions exist and average pump delivery pressure becomes high, the pumps 1, 2 delivery pressure sensors output the signal to MC. 2. MC drives the torque control solenoid valve and reduces delivery flow rate of pumps 1, 2. 3.

Therefore, driving torque (pump torque) of pumps 1, 2 is controlled not to exceed the engine output power and hydraulic temperature is prevented from rising while operating the attachment. Condition: Work Mode: Select secondary crushers 1 to 5 or primary crushers 1 to 5 at attachment mode. Attachment pump torque control is effective by Dr. ZX. T2-2-34