hitachi — PUMP CONTROL

SYSTEM / Control System Pump 3 Torque Decrease Control (Only Machine Equipped with Optional Parts) Purpose: Reduces pumps 1, 2 driving torque in order to prevent the engine from stalling and utilize the engine output power efficiently when the pump 3 (optional) driving torque increases as for the machine equipped with pump 3 (optional). Operation: 1. When MC receives the signals from pump 3 delivery pressure sensor (optional), MC drives the torque control solenoid valve. 2. The torque control solenoid valve reduces pumps 1, 2 flow rates. 3.

Thereby, the total pump 1, 2 and 3 driving torque (pump torque) is maintained not to exceed the engine output power and the engine output power is utilized efficiently. Q P-Q curve is controlled in proportion to pump 3 delivery pressure. Normal P-Q Curve T2-2-40 Flow Rate Pressure P