COMPONENT OPERATION / Swing Device Output Curve: Between D and E (During aftershock) When the swing motor stops rotating, aftershock pressure appears at port AM and pressure at port AM increases. (Port AM: High Pressure, Port BM: Low Pressure) At this time, combination valves (A, B) function as the following. Operation of Combination Valve (A): 1. Pressure oil from port AM acts on ball (2) and poppet (1) through the inner passage. 2. Therefore, ball (2) and poppet (1) move to the right. 3. As combination valve (A) functions like this, and when aftershock pressure appears, pressure is relieved promptly. Operation of Combination Valve (B): 4.
Pressure oil from port AM opens ball (2) and flows to port BM through poppet (1). 5. As combination valve (B) makes pressure oil from port AM (high-pressure) flow to port BM (low-pressure), pressure increase at high-pressure side is controlled and aftershock pressure is reduced. 6. Combination valves (A, B) repeat these proce- dures and prevent aftershock of the machine. When pressures at ports AM and BM decrease completely, the combination valve stops function- ing. Pressure at Port AM Pressure (P) A B C D E Time (T) T1V1-03-02-001 Pressure at Port BM Pressure (P) Without Combination Valve Time (T) T1V1-03-02-002 T3-2-20 With Combination Valve A B Co Va C D E Co Va