COMPONENT OPERTATION / Control Valve ANTI-DRIFT VALVE The anti-drift valve is provided in the circuits of boom cylinder bottom side and arm cylinder rod side and prevents the cylinders from drifting. NOTE: Both boom and arm anti-drift valves are identical in construction. Holding Operation 1. When the control lever is in neutral (neutral spool position), the switch valve in anti-drift valve is not shifted. 2. Pressure at the boom cylinder bottom side (arm cylinder rod side) passes through the switch valve and acts to the check valve in anti-drift valve. 3. Consequently, as the check valve is pushed and the return circuit from cylinder is blocked, the cylinder drift is reduced.
Releasing Operation Boom Cylinder 1. When the arm is rolled in or the boom is lowered, pressure oil from the pilot valve pushes the piston in anti-drift valve and shifts the switch valve. 2. Oil in the spring chamber of check valve flows back to the hydraulic oil tank through the passage in switch valve. 3. When pressure in the spring chamber decreases and pressure oil from the cylinder bottom side is larger than pressure in the spring chamber and spring force, the check valve moves to the right due to a area difference. 4. Consequently, return oil from the boom cylinder bottom side (arm cylinder rod side) flows to the spool.
As pressure decrease in the spring chamber is reduced by the orifice in switch valve, the check valve is prevented from rapidly moving and the shock is reduced during boom lower operation. T1V1-03-03-047 Anti-Drift Valve (Check Valve) Anti-Drift Valve (Switch Valve) Pressure Oil from Pump 1 Boom Cylinder To Hydraulic Oil Tank From Pilot Valve T1V1-03-03-048 Anti-Drift Valve (Check Valve) Anti-Drift Valve (Switch Valve) T3-3-36