SYSTEM / Controller MC: MAIN CONTROLLER Function Outline Engine Control Engine Control Dial Control MC sends the signal to ECM according to the idle position of engine control dial and controls the engine speed. When all control levers are in neutral with the engine control dial at fast idle position, MC sends the signal to ECM and reduces engine speed by 100 min from the fast idle speed. HP Mode Control Average Delivery Pressure of Pumps 1 and 2: High Engine Control Dial: Engine Speed 1500 min -1 or faster Power Mode Switch:
HP Mode Position When operating boom raise and arm roll-in on conditions above, MC sends the signal to ECM and increases engine speed beyond the set speed by engine control dial in order to increase engine power. Travel HP Mode Control ZX200-3 class, ZX225US-3 class, ZX225USR-3 class, ZX240-3 class Average Delivery Pressure of Pumps 1 and 2: High Engine Control Dial: Fast Idle Position Travel Mode Switch: Fast When operating travel on conditions above, MC sends the signal to ECM and increases engine speed beyond the set speed by engine control dial in order to increase travel speed. When operating the front attachment at the same time, this control becomes ineffective.
ZX270-3 class Engine Control Dial: Fast Idle Position When operating travel on conditions above, MC sends the signal to ECM and increases engine speed beyond the set speed by engine control dial in order to increase travel speed. When operating the front attachment at the same time, this control becomes ineffective. E Mode Control Condition: Pump Control Pressure and Pump Average Delivery Pressure: Both Low Pressure Pump Control Pressure and Pump Average Delivery Pressure: Both High Pressure Pump Control Pressure: Low Pressure and Pump Average Delivery Pressure: High Pressure Engine Control Dial: Engine Speed 1800 min -1 or faster Power Mode Switch:
E Mode Position On conditions above, MC sends the signal to ECM and decreases engine speed below the set speed by engine control dial. Pump Control Pressure: High Pressure and Pump Average Delivery Pressure: Low Pressure On conditions above, MC sends the signal to ECM and increases engine speed 200 min -1 beyond the set speed by engine control dial. T2-1-4