TRANSPORTATION OPERATION 6. Stop the engine, check that there is nothing around the operator's compartment, then get off the machine. For cab specification machines, close the cab door and front glass securely. 7. Run a cable between the 1st and 2nd track rollers at the machine front and between the sprocket and the track roller at the rear. NOTICE Do not attempt to lift up the machine by hanging a cable to the bracket that is provided for fastening the machine in transportation. Such a practice will damage the machine. 8. Hook the cable to a sling. 9. Set the lifting angle of the cable to 30є to 40є, then lift the machine slowly.
10.After the machine comes off the ground, check carefully that the machine is balanced, then lift slowly. 3-90