ATTACHMENT GUIDE ATTACHMENTS AND OPTIONS ATTACHMENT GUIDE 0. Please read the instruction manual for the attachment and the sections of this manual related to attachments and options. When installing any attachment or option, there may be problems with safety, so please contact your Komatsu distributor before installing. Installing attachments or options without consulting your Komatsu distributor may not only cause problems with safety, but may also have an adverse effect on the operation of the machine and the life of the equipment. Any injuries, accidents, or damage resulting from the use of unauthorized attachments or options will not be the responsibility of Komatsu.
ATTACHMENT COMBINATIONS 0. Depending on the type or combination of work equipment, there is danger that the work equipment may hit the cab or machine body. When using unfamiliar work equipment for the first time, check before starting if there is any danger of interference, and operate with caution. This table lists the combination of bucket which can be installed to the standard arm and long arm. : Can be used : Can be used only for light duty work : Cannot be used NOTICE When the long arm is equipped, if the bucket is pulled in to the machine body, the arm interferes with the body. Operate the long arm carefully.
When the boom is fully lowered during oblique digging, the boom interferes with the undercarriage. Operate the boom carefully. Categories of use For general digging: Digging or loading sand, gravel, clay etc. For light duty digging: Digging or loading dry, uncaked earth and sand, mud etc. For loading work:
Loading dry, loose earth and sand 6-24 WARNING WARNING Name Capacity m3 (yd³) Outside width (bucket body) mm (in) Outside width (side cutter) mm (in) Use Standard arm Long arm Narrow bucket 0.06 (0.08) 300 (11.8) 370 (14.6) Narrow digging Narrow bucket 0.13 (0.17) 410 (16.2) 480 (18.9) Narrow digging Narrow bucket 0.16 (0.21) 560 (22.1) 650 (25.6) Narrow digging Standard bucket 0.22 (0.29) 610 (24.0) 680 (26.8) General digging