DETAILED CONTROLS AND GAUGES OPERATION Blade Control Lever 0. NOTICE This lever is not locked even when the safety lock lever is at the LOCK position, so when not operating the blade, be careful not to touch this lever. When operations using the blade are continued for more than one hour, pay careful attention to the rise in the water temperature. This lever (5) is used to control the blade. (a) Lower (b) Raise Travel Levers 0. WARNING Do not put your foot on the pedal unless the machine is traveling. If you leave your foot on the pedal and press it by mistake, the machine will move suddenly. This may lead to a serious accident.
Do not rest a foot on the pedal except when traveling or steering the machine using the pedal. If the track frame is facing the rear, the direction of travel operations will be reversed. When operating the travel levers, check if the track frame is facing the front or the rear. (If sprocket (A) is at the rear, the track frame is facing the front.) Be careful when traveling or steering the machine using the pedal. This lever (6) is used to change the direction of travel. ( ): This indicates operation of the pedal. (a) FORWARD: This lever is pushed forward (The pedal is angled forward) (b) REVERSE: The lever is pulled back (The pedal is angled back) N (Neutral):
The machine stops REMARK If the lever is shifted to the advance or reverse position from the neutral position, the alarm sounds to warm that the machine is starting to advance. 3-16