DETAILED CONTROLS AND GAUGES OPERATION WINDSHIELD 0. (Machine equipped with cab) When opening or closing the front window, bottom window, or door always set the safety lock lever to the lock position. If the control levers are not locked and they are touched by accident, this may lead to a serious acci- dent. When opening the front window, hold the grip securely with both hands, pull up, and do not let go until the automatic lock catch is locked. When the front window is open, there is danger that it will fall, so always lock it with left and right lock pins (A). When closing the front window, the window will move quicker under its own weight.
Hold the grips securely with both hands when closing it. It is possible to stow (pull up) the front window in the roof of the operator's compartment. Opening 0. 1. Stop the machine on level ground, lower the work equipment completely to the ground, then stop the engine. 2. Set the safety lock lever securely to the LOCK position. 3. Pull lock pins (A) at the top left and right sides of the front window to the inside to release the lock. 3-18 WARNING