4) ASSEMBLY ASSEMBLY Assemble spool and sleeve. The sleeve and spool are correctly assembled when The slots-in sleeve and spool-for the neutral position springs are opposite each other and One of the 3 T-shaped grooves (A) in the spool is opposite one of the sets (B) of small holes in the sleeve. (1) B A ц Η Θ 7405S STVLV44(1) Place the two flat neutral position springs in the slot. (2) 7405S STVLV44(2) Place the curved springs between the flat ones and press them into place. (3) 7405S STVLV44(3) (4) Line up the spring set. 7405S STVLV44(4) 5-28